Toyota Celica 2005, Руководство по ремонту

Страница: 1086 / 2497

H10658
DLC3
CG TC
AT0716
AB0056
H08231
Normal Code
ON
OFF
0.25
0.25
Code 11 and 31
ON
OFF
0.5 2.5 4.0
1.5 0.5
DTC 11
DTC 31
Repeat
− DIAGNOSTICS SUPPLEMENTAL RESTRAINT SYSTEM
DI − 885
2005 CELICA (RM1131U)
3. DTC CHECK (Using diagnosis check wire)
(a) Present troubles codes:
Output the DTC.
(1)
Turn the ignition switch to ON, and wait for approx.
60 seconds.
(2) Using SST, connect terminal TC and CG of the
DLC3.
SST 09843 − 18040
NOTICE:
Pay attention to the terminal connecting position to avoid
a malfunction.
(b) Past troubles codes:
Output the DTC.
(1)
Using SST, connect terminal TC and CG of the
DLC3.
SST 09843 − 18040
(2) Turn the ignition switch to ON, and wait for approx.
60 seconds.
NOTICE:
Pay attention to the terminal connecting position to avoid
a malfunction.
(c) Read the DTC.
Read the DTC by connecting the blinking times. As an ex-
ample, the blinking patterns of normal, 11 and 31 are
shown in the illustration.
S
Normal code indication
The light blinks 2 times per second.
S
Malfunction code indication
The first blinking indicates the first DTC. Se-
cond blinking occurs after 1.5
− second of
pausing.
If there are 2 or more codes, there will be a 2.5 − second pause
between each code. After all the codes are shown, there will be
a 4.0
− second pausing, and they will all be repeated.
HINT:
S
If 2 or more malfunctions are found, the indication starts
from the smaller numbered code.
S
If the light does not blink or comes out at all, or if DTCs are
indicated without a connection of the terminals, proceed
to the ”TC terminal circuit inspection” on page DI
− 1033.
1085