Toyota Celica 2005, Руководство по ремонту

Страница: 1455 / 2497

A11373
1
2
3
4 6
5 7
8
10
9
A10444
A20999
A
A
B
A
A
A
(c)
(c)
(c)
− ENGINE MECHANICAL CYLINDER HEAD
EM − 69
2005 CELICA (RM1131U)
(e) 2ZZ − GE:
Install and uniformly tighten the 20 bearing cap bolts.
After tightening the No. 1 camshaft bearing cap, tighten
them in several passes, in the sequence shown.
Torque: 19 N·m (194 kgf·cm, 14 ft·lbf)
4. CHECK AND ADJUST VALVE CLEARANCE (See page
EM
− 4)
5. INSTALL CAMSHAFT TIMING SPROCKETS AND
VALVE TIMING CONTROLLER ASSEMBLY (See page
EM
− 26)
6. INSTALL OIL FILTER CAP
7. INSTALL GROMMET AND PCV VALVE
8. INSTALL ECT SENSOR (See page SF − 67)
9. INSTALL CAMSHAFT POSITION SENSOR (See page
IG
− 10)
10. 1ZZ − FE:
INSTALL INTAKE MANIFOLD
(a) Install a new gasket, 2 wire harness stays and the intake
manifold with the 4 bolts and 2 nuts.
Torque: 30 N·m (306 kgf·cm, 22 ft·lbf)
(b) Connect the brake booster vacuum hose.
(c) Connect the EVAP hose for ORVR.
11. 2ZZ − GE:
INSTALL INTAKE MANIFOLD
(a) Install the intake manifold insulator to the cylinder block.
(b) Install a new gasket and the intake manifold with the 4
bolts and 2 nuts.
Torque:
A: 34 N·m (347 kgf·cm, 27 ft·lbf)
B: 46 N·m (469 kgf·cm, 34 ft·lbf)
(c) Install the stay with the 2 bolts and nut.
Torque: 24 N·m (245 kgf·cm, 18 ft·lbf)
(d) Install the No.1 ventilation pipe, oil dipstick and guide with
the bolt.
Torque: 24 N·m (245 kgf·cm, 18 ft·lbf)
(e) Connect the brake booster vacuum hose.
(f) Connect the EVAP hose for ORVR.
1454