Toyota Celica 2005, Руководство по ремонту

Страница: 1716 / 2497

Q01057
CL031 − 09
Q06033
D00203
A01231
1
2
3
4 5
6
7
8
A01232
Painted Mark
90 °
CL − 16
− CLUTCH CLUTCH UNIT
2005 CELICA (RM1131U)
INSPECTION
1. INSPECT CLUTCH DISC FOR WEAR OR DAMAGE
Using vernier calipers, measure the rivet head depth.
Minimum rivet depth: 0.3 mm (0.012 in.)
If necessary, replace the clutch disc.
2. INSPECT CLUTCH DISC RUNOUT
Using a dial indicator, check the disc runout.
Maximum runout: 0.8 mm (0.031 in.)
If necessary, replace the clutch disc runout.
3. INSPECT FLYWHEEL RUNOUT
Using a dial indicator, check the flywheel runout.
Maximum runout: 0.1 mm (0.004 in.)
If necessary, replace the flywheel.
HINT:
The flywheel bolts are tightened in 2 progressive steps, (1) and
(3).
(1) Install and uniformly tighten the 8 mounting bolts, in
several passes, in the sequence shown.
Torque: 49 N·m (500 kgf·cm, 36 ft·lbf)
(2) Mark the flywheel bolt with paint.
(3) Retighten the flywheel bolts by an additional 90 ° .
(4) Check that the painted mark in now at a 90 ° angle
to (2).
1715