Toyota Celica 2005, Руководство по ремонту

Страница: 1391 / 2497

A10366
1ZZ − FE:
2ZZ − GE:
A10411
Matchmarks
A10412
A01053
Valve Lifter
− ENGINE MECHANICAL VALVE CLEARANCE
EM − 5
2005 CELICA (RM1131U)
(b) Turn the crankshaft 1 revolution (360 ° ) and align the mark
as above (See procedure in step 2).
(c) Check only the valves indicated as shown. Measure the
valve clearance (See procedure in step (a)).
4. 1ZZ − FE:
ADJUST VALVE CLEARANCE
(a) Set the No. 1 cylinder to the TDC/compression (See pro-
cedure in step 2).
(b) Place matchmarks on the timing chain and camshaft tim-
ing sprockets.
(c) Remove the 2 bolts and chain tensioner.
(d) Remove the camshaft and timing sprocket assemblies
(See page EM
− 44).
(1) 19 camshaft bearing cap bolts
(2) 9 camshaft bearing caps (No. 1 & No. 3)
(3) Exhaust camshaft and timing sprocket assembly
(4) Intake camshaft and timing sprocket assembly
HINT:
When holding the timing chain, disconnect the timing chain
from the camshaft timing sprocket.
(e) Tie the timing chain with a string as shown in the illustra-
tion.
NOTICE:
S
Be careful not to drop anything inside the timing
chain cover.
S
Do not allow the chain to come into contact with water
or dust.
(f) Remove the valve lifters.
1390