Toyota Celica 2005, Руководство по ремонту

Страница: 1468 / 2497

EM161 − 04
A10437
A10381
2ZZ − GE:
A10436
A10435
EM − 82
− ENGINE MECHANICAL ENGINE UNIT
2005 CELICA (RM1131U)
INSTALLATION
1. ASSEMBLY ENGINE AND TRANSAXLE
(C56 M/T: See page MX
− 9)
(C60 M/T: See page MX − 9)
(U240E A/T: See page AX − 35)
(U341E A/T: See page AX − 35)
2. INSTALL ENGINE AND TRANSAXLE ASSEMBLY IN
VEHICLE
(a) Attach the engine sling device to the engine hangers.
(b) Slowly lower the vehicle, and raise the engine into the en-
gine compartment.
(c) Keep the engine level, and align RH and LH mountings
with the body bracket.
(d) 1ZZ − FE:
Install the RH engine mounting insulator with the 4 bolts
and 2 nuts.
Torque: 52 N·m (530 kgf·cm, 38 ft·lbf)
(e) 2ZZ − GE:
Install the RH engine mounting insulator with the 5 bolts
and 2 nuts.
Torque: 52 N·m (530 kgf·cm, 38 ft·lbf)
(f) Install the LH engine mounting through bolt and nut.
Torque: 80 N·m (816 kgf·cm, 59 ft·lbf)
3. REMOVE ENGINE SLING DEVICE
4. INSTALL REAR ENGINE MOUNTING
(a) Install the rear engine mounting bracket with the 3 bolts.
Torque: 64 N·m (653 kgf·cm, 47 ft·lbf)
(b) Temporarily install the rear engine mounting insulator with
the through bolt.
1467