Toyota Celica 2005, Руководство по ремонту

Страница: 1860 / 2497

AX0L7 − 04
D05885
D05884
D05882
(a)
(b)
D07851
Lock Cam
Cam
Stopper
Lock Key
Claw
D05889
ACC
− AUTOMATIC TRANSAXLE (U240E) FLOOR SHIFT ASSEMBLY
AX − 27
2005 CELICA (RM1131U)
INSTALLATION
1. INSTALL FLOOR SHIFT ASSEMBLY
(a) Pull in the cable while pressing the clip of the transaxle
control cable to the floor shift assembly.
(b) Install the cable end from the rod of the floor shift assem-
bly.
(c) Install the floor shift assembly with the 4 bolts.
Torque: 12 N·m (120 kgf·cm, 9 ft·lbf)
(d) Connect the 2 wire harness clamps from the floor shift as-
sembly.
(e) Connect the 2 connector.
2. INSTALL KEY INTERLOCK CABLE
(a) Pass the key interlock cable end through the hole in the
floor shift assembly.
HINT:
Make sure that the claws shown by the arrow in the illustration
are locked.
(b)
With the shift lever in N position, set the hole of the cable
end to the floor shift assembly to assemble them.
(c) At the time of reassembly:
With the key in ACC, push a claw into lock key.
At this time, be careful not to apply undue force on bend-
ing to the cable (Cable length adjustment is completed).
HINT:
Check that the key lock cam contacts the cam stopper.
(d) With the key in ACC, install the cable cap claw to the key
interlock.
1859