Toyota 2004 Matrix Скачать руководство пользователя

Страница: 116 / 310

’04 MATRIX_U (L/O 0307)

2004 MATRIX from Oct. ’03 Prod. (OM12861U)

“START”—Starter motor on. The key

will return to the “ON” position when
released.

For starting tips, see page 197 in Section
3.

“ON”—Engine on and all accessories

on.

This is the normal driving position.

“ACC”—Accessories such as the radio
operate, but the engine is off.

If you leave the key in the “ACC” or
“LOCK” position and open the driver’s

door, a buzzer will remind you to remove

the key.

“LOCK”—Engine is off and the steering

wheel is locked. The key can be re-

moved only at this position.

You must push in the key to turn it from

“ACC” to the “LOCK” position. On vehicles

with an automatic transmission, the selec-
tor lever must be in the “P” position be-

fore pushing the key.
When starting the engine, the key may

seem stuck at the “LOCK” position. To

free it, first be sure the key is pushed all
the way in, and then rock the steering

wheel slightly while turning the key gently.

CAUTION

For manual transmission:
Never remove the key when the ve-

hicle is moving, as this will lock the

steering wheel and result in loss of
steering control.

NOTICE

Do not leave the key in the “ON”
position if the engine is not running.

The battery will discharge and the

ignition could be damaged.

Ignition switch with steering

lock

Содержание 2004 Matrix























































































































































































































































































































Результаты поиска

Содержание 2004 Matrix

Отзывы:

Похожие инструкции для 2004 Matrix

Бренды по названию

Популярные бренды

Toyota 2004 Matrix, Руководство пользователя

Результаты поиска

Содержание 2004 Matrix

Отзывы:

Похожие инструкции для 2004 Matrix

Бренды по названию

Популярные бренды