Toyota 2004 Matrix Скачать руководство пользователя

Страница: 71 / 310

’04 MATRIX_U (L/O 0307)

2004 MATRIX from Oct. ’03 Prod. (OM12861U)

This indicator comes on when the igni-

tion key is turned to the “ON” position.
It goes off after about 6 seconds. This

means the SRS side airbags are operat-

ing properly.

This warning light system monitors the

airbag sensor assembly, front airbag sen-
sors, side airbag sensors, driver’s seat

position sensor, driver’s seat belt buckle

switch, seat belt pretensioner assemblies,
inflators, warning light, interconnecting wir-

ing and power sources. (For details, see

“Service reminder indicators and warning
buzzers” on page 91 in Section 1

−

6.)

If any of the following conditions occurs,

this indicates a malfunction of the airbags

or seat belt pretensioners. Contact your
Toyota dealer as soon as possible.

When the ignition key is turned to the

“ON” position, the light does not come
on, remains on or flashes.

The light comes on or starts flashing
while driving.

In the following cases, contact your Toyota

dealer as soon as possible:

Any of the SRS side airbags have

been inflated.

The portion of the doors (shaded in the

illustration) was involved in an accident

that was not severe enough to cause
the SRS side airbags to inflate.

The surface of the seats with the side
airbag (shaded in the illustration) is

scratched, cracked, or otherwise dam-

aged.

Содержание 2004 Matrix























































































































































































































































































































Результаты поиска

Содержание 2004 Matrix

Отзывы:

Похожие инструкции для 2004 Matrix

Бренды по названию

Популярные бренды

Toyota 2004 Matrix, Руководство пользователя

Результаты поиска

Содержание 2004 Matrix

Отзывы:

Похожие инструкции для 2004 Matrix

Бренды по названию

Популярные бренды