Toyota 2004 Matrix Скачать руководство пользователя страница 192

Страница: 192 / 310

’04 MATRIX_U (L/O 0307)

192

2004 MATRIX from Oct. ’03 Prod. (OM12861U)

Vehicle load limits include total load

capacity, seating capacity, towing ca-

pacity and cargo capacity. Follow the

load limits shown below.

Total load capacity:

385 kg (850 Ib.)

Total load capacity means com-

bined weight of occupants, cargo

and luggage. Tongue load is in-

cluded when trailer towing.

Seating capacity:

Total 5 (Front 2, Rear 3)

Seating capacity means the maxi-

mum number of occupants whose

weight is supposed to be 68 kg (150

lb.) per person. Depending on the

weight of person, the seating ca-

pacity given may exceed the total

load capacity.

NOTICE

Even if the number of occupants

are within the seating capacity,

do not exceed the total load ca-

pacity.

Towing capacity:

680 kg (1500 Ib.)

Towing capacity means the maxi-

mum gross trailer weight (trailer

weight plus its cargo weight) that

your vehicle is able to tow.

Cargo capacity

Cargo capacity may increase or de-

crease depending on the size (weight)

and the number of occupants. For de-

tails, see “Capacity and distribution”

that follows.

CAUTION

Do not apply the load more than

each load limit. That may cause

not only damage to the tires, but

also deterioration to the steering

ability and braking ability, which

may cause an accident.

When stowing cargo and luggage in

the vehicle, observe the following:

Put cargo and luggage in the lug-

gage compartment when at all

possible. Be sure all items are se-

cured in place.

Be careful to keep the vehicle bal-

anced. Locating the weight as far

forward as possible helps maintain

balance.

For better fuel economy, do not

carry unneeded weight.

CAUTION

When the rear seatbacks are in

the upright position—

To prevent cargo and luggage

from sliding forward during

braking, do not stack anything

in the luggage compartment

higher than the seatbacks.

Keep cargo and luggage low,

as close to the floor as pos-

sible.

Vehicle load limits

Cargo and luggage—

—Stowage precautions

Содержание 2004 Matrix























































































































































































































































































































Результаты поиска

Содержание 2004 Matrix

Отзывы:

Бренды по названию

Популярные бренды

Toyota 2004 Matrix, Руководство пользователя

Результаты поиска

Содержание 2004 Matrix

Отзывы:

Бренды по названию

Популярные бренды