Toyota 2004 Matrix Скачать руководство пользователя страница 79

Страница: 79 / 310

’04 MATRIX_U (L/O 0307)

2004 MATRIX from Oct. ’03 Prod. (OM12861U)

Do not install a child restraint sys-
tem on the rear seat if it interferes

with the lock mechanism of the

front seats. Otherwise, the child or
front seat occupant(s) may be killed

or seriously injured in case of sud-

den braking or a collision.

If the driver’s seat position does

not allow sufficient space for safe

installation, install the child re-
straint system on the rear right

seat.

1. Run the lap and shoulder belt through

or around the convertible seat following
the instructions provided by its

manufacturer and insert the tab into

the buckle taking care not to twist the
belt. Keep the lap portion of the belt

tight.

CAUTION

After inserting the tab, make sure
the tab and buckle are locked and

that the lap and shoulder portions

of the belt are not twisted.

Do not insert coins, clips, etc. in

the buckle as this may prevent your

child from properly latching the tab
and buckle.

If the seat belt does not function
normally, it cannot protect your

child from death or serious injury.

Contact your Toyota dealer immedi-
ately. Do not install the child

restraint system on the seat until

the seat belt is fixed.

Содержание 2004 Matrix























































































































































































































































































































Результаты поиска

Содержание 2004 Matrix

Отзывы:

Бренды по названию

Популярные бренды

Toyota 2004 Matrix, Руководство пользователя

Результаты поиска

Содержание 2004 Matrix

Отзывы:

Бренды по названию

Популярные бренды