Toyota 2004 Matrix Скачать руководство пользователя страница 180

Страница: 180 / 310

’04 MATRIX_U (L/O 0307)

180

2004 MATRIX from Oct. ’03 Prod. (OM12861U)

Driving with tire chains installed.

Driving over the steps such as the

joints on the road.

Driving on roads where the road

surface is pitted or has other differ-

ences in surface height.

Install all 4 tires of specified size at

appropriate pressure: The anti

−

lock

brake system detects vehicle speeds
using the speed sensors for respec-

tive wheels’ turning speeds. The use

of tires other than specified may fail
to detect the accurate turning speed

resulting in a longer stopping dis-
tance.

Type A

Type B

“ABS” warning light

The light comes on when the ignition key

is turned to the “ON” position. If the anti

−

lock brake system works properly, the

light turns off after a few seconds. There-

after, if the system malfunctions, the light
comes on again.
When the “ABS” warning light is on (and
the brake system warning light is off), the

anti

−

lock brake system does not operate,

but the brake system still operates con-
ventionally.
When the “ABS” warning light is on (and

the brake system warning light is off), the
anti

−

lock brake system does not operate

so that the wheels could lock up during

a sudden braking or braking on slippery
road surfaces.

Содержание 2004 Matrix























































































































































































































































































































Результаты поиска

Содержание 2004 Matrix

Отзывы:

Бренды по названию

Популярные бренды

Toyota 2004 Matrix, Руководство пользователя

Результаты поиска

Содержание 2004 Matrix

Отзывы:

Бренды по названию

Популярные бренды