Toyota 2004 Matrix Скачать руководство пользователя

Страница: 228 / 310

’04 MATRIX_U (L/O 0307)

228

2004 MATRIX from Oct. ’03 Prod. (OM12861U)

After repairing the flat tire, change

it with compact spare tire and rein-

stall the wheel ornament as fol-

lows.

Steel wheels—

1. Put the wheel ornament into posi-

tion.
Align the cutout of the wheel orna-

ment with the valve stem as

shown.

2. Press hand firmly on one side of

wheel ornament and then firmly

tap the other side around the edge

of wheel ornament with the heel

of your hand to snap into place.

Aluminum wheels—
Push the wheel ornament into the

center hole.

CAUTION

Take due care in handling the or-

nament to avoid unexpected per-

sonal injury.

If your vehicle becomes stuck in snow,

mud, sand, etc., then you may attempt

to rock the vehicle free by moving it
forward and backward.

CAUTION

Do not attempt to rock the vehicle
free by moving it forward and back-

ward if people or objects are any-

where near the vehicle. During the
rocking operation the vehicle may

suddenly move forward or backward

as it becomes unstuck, causing injury
or damage to nearby people or ob-

jects.

NOTICE

If you rock your vehicle, observe the
following precautions to prevent dam-

age to the transmission and other

parts.

Do not depress the accelerator ped-

al while shifting the selector lever

or before the transmission is com-
pletely shifted to forward or reverse

gear.

Do not race the engine and avoid

spinning the wheels.

If your vehicle remains stuck after
rocking the vehicle several times,

consider other ways such as tow-
ing.

If your vehicle becomes stuck

Содержание 2004 Matrix























































































































































































































































































































Результаты поиска

Содержание 2004 Matrix

Отзывы:

Похожие инструкции для 2004 Matrix

Бренды по названию

Популярные бренды

Toyota 2004 Matrix, Руководство пользователя

Результаты поиска

Содержание 2004 Matrix

Отзывы:

Похожие инструкции для 2004 Matrix

Бренды по названию

Популярные бренды