Toyota 2004 Matrix Скачать руководство пользователя

Страница: 145 / 310

’04 MATRIX_U (L/O 0307)

127

2004 MATRIX from Oct. ’03 Prod. (OM12861U)

Error messages

If the player malfunctions, your audio sys-

tem will display the following error mes-
sages.

“TIGHT TAPE”:

This message is dis-

played when the tape is tight and the

player cannot turn the tape hubs. Remove

the tape. Hold the tape with the open end
down and try to turn the right hub coun-

terclockwise with a pencil. Turn the tape

over and repeat. If the hubs do not turn
easily, your tape may be damaged and

should not be used in the player. Try a

new tape to make sure your player is
working properly.

“BROKEN TAPE”:

This message is dis-

played when the tape is broken. Try a
new tape.

“CLEAN PLAYER”:

This message is dis-

played when the cassette tape player

need to be cleaned. It will still play tapes,

but you should clean it as soon as pos-
sible to prevent damage to the tapes and

player. After cleaning the player, push and

hold the cassette tape eject button until
you hear a beep. “CLEANED” will appear

on the display.

“WRAPPED TAPE”:

This message is dis-

played when the tape is wrapped around

the tape head. Attempt to get the cassette
out. Try a new tape.
If malfunction is not rectified, take your

vehicle to your Toyota dealer.

Cut tape bypass function

When you use the endless type tape
(head cleaner tape etc.), you must deacti-

vate the tape bypass feature.
To deactivate this feature:

1. Turn the ignition key to the “ACC” or

“ON” position, and the audio is off.

2. Push and hold the “TAPE/CD” button

for more than two seconds. “READY”
will appear on the display.

3. Insert the endless type tape.

The tape bypass feature will stay deacti-

vated until the cassette tape eject button

is pushed.

TONE (Manual tone adjustment function)

Push the “TONE” button to select the

bass, midrange or treble tone control posi-
tion. (”BASS”, “MID”, “TREB” will appear

on the display.) To adjust the tone, turn

“TUNE/SELECT” knob.
“BASS”: Adjusts low

−

pitched tones. The

display ranges from

−

6 to +6.

“MID”: Adjusts mid

−

pithed tones. The dis-

play ranges from

−

6 to +6.

“TREB”: Adjusts high

−

pitched tones. The

display ranges from

−

6 to +6.

To adjusts all of the tone controls to the
middle position, push and hold the “TONE”

button for more than two seconds. “FLAT”

will appear on the display.

Содержание 2004 Matrix























































































































































































































































































































Результаты поиска

Содержание 2004 Matrix

Отзывы:

Похожие инструкции для 2004 Matrix

Бренды по названию

Популярные бренды

Toyota 2004 Matrix, Руководство пользователя

Результаты поиска

Содержание 2004 Matrix

Отзывы:

Похожие инструкции для 2004 Matrix

Бренды по названию

Популярные бренды