Toyota 2004 Matrix Скачать руководство пользователя

Страница: 57 / 310

’04 MATRIX_U (L/O 0307)

2004 MATRIX from Oct. ’03 Prod. (OM12861U)

To connect the extender to the seat

belt, insert the tab into the seat belt
buckle so that the “PRESS” signs on

the buckle release buttons of the ex-

tender and the seat belt are both facing
outward as shown.

You will hear a click when the tab locks
into the buckle.
When releasing the seat belt, press on

the buckle release button on the extender,
not on the seat belt. This helps prevent

damage to the vehicle interior and extend-

er itself.
When not in use, remove the extender

and store in the vehicle for future use.

CAUTION

After inserting the tab, make sure
the tab and buckle are locked and

that the lap and shoulder portions

of the belt and the seat belt extend-
er are not twisted.

Do not insert coins, clips, etc. in

the buckle as this may prevent you
from properly latching the tab and

buckle.

If the seat belt does not function

normally, immediately contact your

Toyota dealer. Do not use the seat
until the seat belt is fixed, because

it cannot protect an adult occupant

or your child from injury.

The driver and front passenger seat

belt pretensioners are designed to be

activated in response to a severe fron-

tal impact.

When the sensor detects a severe frontal

impact, the front seat belts are quickly
drawn back by the retractors so that the

belts snugly restrain the occupants.
The seat belt pretensioners are activated

even with no passenger in the front seat.
The seat belt pretensioners and SRS air-
bags may not operate together in case of

collisions at certain speeds and angles.

—Seat belt pretensioners

Содержание 2004 Matrix























































































































































































































































































































Результаты поиска

Содержание 2004 Matrix

Отзывы:

Похожие инструкции для 2004 Matrix

Бренды по названию

Популярные бренды

Toyota 2004 Matrix, Руководство пользователя

Результаты поиска

Содержание 2004 Matrix

Отзывы:

Похожие инструкции для 2004 Matrix

Бренды по названию

Популярные бренды