Toyota 2004 Matrix, Руководство пользователя

Страница: 140 / 310

’04 MATRIX_U (L/O 0307)
122
2004 MATRIX from Oct. ’03 Prod. (OM12861U)
To return to playing speed while it is fast
forwarding, push the “ ” button; to re-
turn to playing speed while it is rewinding,
push the “ ” button.
If a tape side rewinds completely, the cas-
sette player will stop and then play that
same side. If a tape fast forwards com-
pletely, the cassette player will play the
other side of the tape, using the auto − re-
verse feature.
Compact disc player
Push and hold the “ ” button to fast
forward within a track. “FWD >>” and
elapsed time will appear on the display.
Push and hold the “ ” button to reverse
within a track. “REV <<” and elapsed time
will appear on the display.
When you release the button, the compact
disc player will resume playing.
AM/FM
Push the “AM/FM” button to switch be-
tween the AM and FM band. “AM”, “FM1”
or “FM2” will appear on the display.
Also, push this button to switch from the
cassette or compact disc operation to the
radio.
Alternate Frequency
To turn the AF mode on, push and hold
the “AM/FM” button until you hear a beep.
“AF ON” will appear on the display.
When reception condition worsen, the au-
dio system will select the RDS station
which has the same PI (Program Identifi-
cation) code.
To turn the AF mode off, push and hold
the “AM/FM” button again until you hear
a beep. “AF OFF” will appear on the dis-
play.
BAL/FADE (Sound balance adjustment
function)
This button is used to adjust the sound
balance between the front and rear, and
the right and left speakers.
For front/rear adjustment, push the “BAL/
FADE” button repeatedly until “FAD” ap-
pears on the display. Then turn the
“TUNE/SELECT” knob to adjust the front/
rear balance.
For left/right adjustment, push the “BAL/
FADE” button repeatedly until “BAL” ap-
pears on the display. Then turn the
“TUNE/SELECT” knob to adjust the left/
right balance.
To return to the middle position balances,
push and hold the “BAL/FADE” button for
two seconds.
CD (Compact disc player)
Push the “CD/TAPE” button to switch be-
tween the compact disc operation and the
cassette operation. A disc must already
be loaded in the player.
Also, push this button to switch from radio
to the compact disc operation or the cas-
sette operation.
Error messages
If the player malfunctions, your audio sys-
tem will display the following error mes-
sages.
“CHECK CD”:
D
The road is too rough. The disc should
play when the road is smoother.
D
The disc is dirty, scratched, wet or
upside down.
D
The air is very humid. If so, wait about
an hour and try again.
If the disc is not playing correctly, for any
other reason, try a known good compact
disc.