Toyota 2004 Matrix Скачать руководство пользователя страница 130

Страница: 130 / 310

’04 MATRIX_U (L/O 0307)

112

2004 MATRIX from Oct. ’03 Prod. (OM12861U)

YOUR COMPACT DISC PLAYER

(type 1 and 2)

When you insert a disc, gently push it in
with the label side up. (The player will

automatically eject a disc if the label side

is down.) The compact disc player will
play from track 1 through the end of the

disc. Then it will play from track 1 again.

NOTICE

Never try to disassemble or oil any
part of the compact disc player. Do

not insert anything other than com-

pact discs into the slot.

The player is intended for use with 12 cm

(4.7 in.) discs only.

YOUR COMPACT DISC PLAYER WITH

CHANGER (type 3)

When you insert a disc, push the “LOAD”
button, wait for the load/eject status light

to turn green, then gently push the disc

in with the label side up. (The player will
automatically eject a disc if the label side

is down.) The compact disc player will

play from track 1 through the end of the
disc. Then it will play from track 1 of the

next disc.
The player is intended for use with 12 cm

(4.7 in.) discs only.

NOTICE

Do not stack up two discs for in-
sertion, or it will cause damage to

the compact disc player. Insert only

one compact disc into slot at a
time.

Never try to disassemble or oil any

part of the compact disc player. Do
not insert anything other than com-

pact discs into the slot.

Содержание 2004 Matrix























































































































































































































































































































Результаты поиска

Содержание 2004 Matrix

Отзывы:

Бренды по названию

Популярные бренды

Toyota 2004 Matrix, Руководство пользователя

Результаты поиска

Содержание 2004 Matrix

Отзывы:

Бренды по названию

Популярные бренды