Toyota 2004 Matrix Скачать руководство пользователя страница 137

Страница: 137 / 310

’04 MATRIX_U (L/O 0307)

119

2004 MATRIX from Oct. ’03 Prod. (OM12861U)

After the traffic announcement program is

over, the display returns to the previous

mode.
If no traffic program station is found, “No

Traffic” will appear on the display for 5

seconds and the display returns to the

previous mode. If the “TRAF” button is

pushed when the compact disc player is

on, the radio will start seeking traffic pro-

gram stations. Audio source will change

only if there is a traffic announcement.
When a “TA” is received, the radio stores

the volume of the previous mode and ad-

justs the volume to the previous interrupt
volume. During the traffic announcement,

you can adjust the volume using the

“PWR/VOL”.
The adjusted volume will be used as the

new default interrupt volume. The interrupt
volume has a minimum default setting.

The stored interrupt volume will be the

greater of the current volume and the
minimum default setting. After an interrupt,

the radio system will return to the volume

that was active before the interrupt.

TUNE (Tuning)

Turn the knob clockwise to step up the

frequency. Turn the knob counterclockwise
to step down the frequency.

Содержание 2004 Matrix























































































































































































































































































































Результаты поиска

Содержание 2004 Matrix

Отзывы:

Бренды по названию

Популярные бренды

Toyota 2004 Matrix, Руководство пользователя

Результаты поиска

Содержание 2004 Matrix

Отзывы:

Бренды по названию

Популярные бренды