Toyota 2004 Matrix Скачать руководство пользователя

Страница: 209 / 310

’04 MATRIX_U (L/O 0307)

209

2004 MATRIX from Oct. ’03 Prod. (OM12861U)

Keep the front wheels in proper

alignment.

Avoid hitting the curb and

slow down on rough roads. Improper
alignment not only causes faster tire

wear but also puts an extra load on

the engine, which, in turn, wastes fuel.

Keep the bottom of your vehicle free

from mud, etc.

This not only lessens

weight but also helps prevent corro-
sion.

Keep your vehicle tuned

−

up and in

top shape.

A dirty air cleaner, improp-

er valve clearance, dirty plugs, dirty oil

and grease,brakes not adjusted, etc. all
lower engine performance and contrib-

ute to poor fuel economy. For longer

life of all parts and lower operating
costs, keep all maintenance work on

schedule, and if you often drive under

severe conditions, see that your vehicle
receives more frequent maintenance.

(For scheduled maintenance informa-

tion, please refer to the “Scheduled
Maintenance Guide” or “Owner’s Manu-

al Supplement”.)

CAUTION

Never turn off the engine to coast
down hills. Your power steering and

brake booster will not function with-

out the engine running. Also, the
emission control system operates

properly only when the engine is run-

ning.

Содержание 2004 Matrix























































































































































































































































































































Результаты поиска

Содержание 2004 Matrix

Отзывы:

Похожие инструкции для 2004 Matrix

Бренды по названию

Популярные бренды

Toyota 2004 Matrix, Руководство пользователя

Результаты поиска

Содержание 2004 Matrix

Отзывы:

Похожие инструкции для 2004 Matrix

Бренды по названию

Популярные бренды