Toyota 2004 Matrix Скачать руководство пользователя

Страница: 39 / 310

’04 MATRIX_U (L/O 0307)

2004 MATRIX from Oct. ’03 Prod. (OM12861U)

The side windows are tapped or bro-

ken.

The battery terminal is disconnected
and then reconnected.

The ignition is hotwired.

After one minute, the alarm automatically

stops and the indicator light starts flashing

again.

Reactivating the alarm

Once set, until you cancel the system, the
system automatically resets the alarm af-

ter the alarm has stopped.
The alarm will activate again under the

same circumstances described in “Activat-

ing the alarm”.

Stopping the alarm

You can stop the alarm in either of the
following ways:

Unlock any of the side doors with the
key or wireless remote control transmit-

ter.

Place the ignition switch in the “ON”
position.

CANCELLING THE SYSTEM

You can cancel the system as described

in “Stopping the alarm”.
If you cancel the system by unlocking any

of the side doors but no door is opened
within 30 seconds, all the side doors and

back door lock automatically and the sys-

tem will be set again.

TESTING THE SYSTEM

You can check the system operation as
follows.

1. Open all the windows.
2. Set the system as described in

“SETTING THE SYSTEM”.

3. Unlock the driver’s door with the inside

lock knob. The system should activate

and the alarm should sound.

4. Stop the alarm as described in “Stop-

ping the alarm”.

5. Repeat steps 2 to 4 for the other

doors. (For rear side doors, unlock and

then open the doors in step 3.)

If the system does not work properly,

have it checked by your Toyota dealer.

To open the hood:

1. Pull the hood lock release lever. The

hood will spring up slightly.

CAUTION

Before driving, be sure that the hood
is closed and securely locked. Other-

wise, the hood may open unexpected-

ly while driving and an accident may
occur.

Hood

Содержание 2004 Matrix























































































































































































































































































































Результаты поиска

Содержание 2004 Matrix

Отзывы:

Похожие инструкции для 2004 Matrix

Бренды по названию

Популярные бренды

Toyota 2004 Matrix, Руководство пользователя

Результаты поиска

Содержание 2004 Matrix

Отзывы:

Похожие инструкции для 2004 Matrix

Бренды по названию

Популярные бренды