Toyota 2004 Matrix Скачать руководство пользователя страница 133

Страница: 133 / 310

’04 MATRIX_U (L/O 0307)

115

2004 MATRIX from Oct. ’03 Prod. (OM12861U)

Alternate Frequency

To turn the AF mode on, push and hold

the “AM/FM” button until you hear a beep.

“AF ON” will appear on the display.
When reception condition worsen, the au-

dio system will select the RDS station

which has the same PI (Program Identifi-

cation) code.
To turn the AF mode off, push and hold

the “AM/FM” button again until you hear

a beep. “AF OFF” will appear on the dis-

play.

BAL/FADE (Sound balance adjustment

function)

This button is used to adjust the sound

balance between the front and rear, and

the right and left speakers.
For front/rear adjustment, push the “BAL/

FADE” button repeatedly until “FAD” ap-

pears on the display. Then turn the
“TUNE/SELECT” knob to adjust the front/

rear balance.
For left/right adjustment, push the “BAL/

FADE” button repeatedly until “BAL” ap-

pears on the display. Then turn the
“TUNE/SELECT” knob to adjust the left/

right balance.

To return to the middle position balances,

push and hold the “BAL/FADE” button for

two seconds.

CD/AUX (Compact Disc/Auxiliary)

Push the “CD/AUX” button to switch from
radio to compact disc operation. A disc

must already be loaded in the player.

Error codes

If the player malfunctions, your audio sys-

tem will display the following error mes-
sages.

“CHECK CD”:

The road is too rough. The disc should

play when the road is smoother.

The disc is dirty, scratched, wet or

upside down.

The air is very humid. If so, wait about
an hour and try again.

If the disc is not playing correctly, for any
other reason, try a known good compact

disc.

“PLAYER ERROR”:

There is trouble in-

side the system. Eject the disc. Set the

disc again.
If malfunction is not rectified, take your

vehicle to your Toyota dealer.

EQ (Equalizer)

Your audio system can store five different

EQ settings so that you will not need to
readjust it every time you listen to a dif-

ferent program.
To use a preset setting:
Push the “EQ” button repeatedly until the

EQ number you want to use appears on
the display.
To change a preset EQ setting:

1. Use the “TONE” button and the

“TUNE/SELECT” knob to select the

desired equalization. (For details, see
“TONE”.)

2. Push and hold the “EQ” button until

“SELECT EQ #” appears on the dis-

play.

3. Push the “EQ” button repeatedly or

turn the “TUNE/SELECT” knob to select

the desired preset EQ number.

4. Push and hold the “EQ” button until

“EQ SAVED” appears on the display

and you hear a beep. This EQ setting
is saved to that number.

HR/MIN (Hours/minutes adjustment)

These buttons are used to adjust the

clock time. (For details, see “Clock” on

page 154 in Section 1

−

10.)

Содержание 2004 Matrix























































































































































































































































































































Результаты поиска

Содержание 2004 Matrix

Отзывы:

Бренды по названию

Популярные бренды

Toyota 2004 Matrix, Руководство пользователя

Результаты поиска

Содержание 2004 Matrix

Отзывы:

Бренды по названию

Популярные бренды