Toyota 2004 Matrix Скачать руководство пользователя

Страница: 54 / 310

’04 MATRIX_U (L/O 0307)

2004 MATRIX from Oct. ’03 Prod. (OM12861U)

When a passenger’s shoulder belt is com-

pletely extended and is then retracted

even slightly, the belt is locked in that
position and cannot be extended. This fea-

ture is used to hold the child restraint

system securely. (For details, see “Child
restraint” on page 54 in this Section.) To

free the belt again, fully retract the belt

and then pull the belt out once more.
If the seat belt cannot be pulled out of the

retractor, firmly pull the belt and release

it. You will then be able to smoothly pull
the belt out of the retractor.

CAUTION

After inserting the tab, make sure
the tab and buckle are locked and

that the belt is not twisted.

Do not insert coins, clips, etc. in
the buckle as this may prevent you

from properly latching the tab and

buckle.

If the seat belt does not function

normally, immediately contact your
Toyota dealer. Do not use the seat

until the seat belt is fixed, because

it cannot protect an adult occupant
or your child from injury.

Take up

slack

Too high

Keeps as low on

hips as possible

Adjust the position of the lap and

shoulder belts.

Position the lap belt as low as possible

on your hips—not on your waist, then ad-
just it to a snug fit by pulling the shoulder

portion upward through the latch plate.

CAUTION

Both high

−

positioned lap belts and

loose

−

fitting belts could cause seri-

ous injuries due to sliding under

the lap belt during a collision or
other unintended event. Keep the

lap belt positioned as low on hips

as possible.

Do not place the shoulder belt un-

der your arm.

Содержание 2004 Matrix























































































































































































































































































































Результаты поиска

Содержание 2004 Matrix

Отзывы:

Похожие инструкции для 2004 Matrix

Бренды по названию

Популярные бренды

Toyota 2004 Matrix, Руководство пользователя

Результаты поиска

Содержание 2004 Matrix

Отзывы:

Похожие инструкции для 2004 Matrix

Бренды по названию

Популярные бренды