83
5.3.14.
Area S (converter mode selection and analog input/output adjustment area)
In the area S, set the parameters related to special functions such as converter initialization and data transfer,
automatic adjustment of analog input/output gain and offset, etc.
To use parameters of the area S, you should input a password "1040."
■
S-00
Special mode selection
Display Contents
Setting range (Selecting item)
Initialized
data
Unit
Write
during
operation
S-00
Special mode
selection
1: Initialize the converter
2: (For special adjustment)
3: Clear protections
99: (For special adjustment)
101: Data transfer to <SET66R-Z>
102: Copy data from <SET66R-Z>
(Without area A)
103: Copy data from <SET66R-Z>
(With area A)
104: Compare data with <SET66R-Z>
-
-
○
Special mode selection: S-00
Setting items of S-00 are described below.
In these items, set or change various functions of the converter.
◆
Setting items of the special mode selection: S-00
Setting
item
Descriptions
1
For details of initialization, refer to {8.3. How to Initialize Converter Main Unit}.
2
This is for special adjustment only. Do not use it usually.
3
For details of clearing protections, refer to {5.4.1. How to Clear Protections}.
99
This is for special adjustment only. Do not use it usually.
101
For details of data transfer to <SET66R-Z>,
refer to {5.4.2. Data Transfer from/to External Console Option}.
102
For details of data copy (without area A) from <SET66R-Z>,
refer to {5.4.2. Data Transfer from/to External Console Option}.
103
For details of data copy (with area A) from <SET66R-Z>,
refer to {5.4.2. Data Transfer from/to External Console Option}.
104
For details of comparing data with <SET66R-Z>,
refer to {5.4.2. Data Transfer from/to External Console Option}.
When you input a different number from "1040" to S-00 and press the [SET] key, "P-Err" (password error) is
displayed.
