100
10. Close the front cover and turn on the converter.
11. Press the [MONI/FNC] key.
･
The [FNC] LED turns on, and a setting item appears in the seven-segment display. For example, immediately
after the converter is turned on, the first item of the basic setting area is displayed.
12. Press the keys [
↑
] or [
↓
] to display "S-00."
13. Press the [
→
] key to blink numbers, and then press the keys [
↑
] or [
↓
] to change them to "S-05."
･
For details of the analog input (2) adjustment: S-05, refer to
{5.3.14. Area S}.
14. Press the [SET] key.
･
"0" is displayed on the extreme right, and the underscore blinks
on the extreme left.
15. Press the [
→
] key to blink required digits, and then press
the keys [
↑
] or [
↓
] to specify"1040."
16. Press the [SET] key.
･
The password input is confirmed, and the screen returns to
"S-05" display.
･
When a different number from "1040" is input, "P-Err" indicating
an error is displayed. In this case, press the keys [
↑
] or [
↓
]
to return to "S-05." Follow the procedures again from the step
14.
Display indicating a password error
17. Press the [SET] key.
･
Again, "0" is displayed on the extreme right, and the underscore
blinks on the extreme left.
18. Press the [
→
] key to blink a required digit, and then press the keys [
↑
] or [
↓
] to change the number
to "1."
･
The display of the setting value automatically returns to that
of the setting item in ten seconds. Unless a setting value is
specified while it is displayed, it cannot be changed.
