108
31. Press the [
→
] key to blink a required digit, and then press the keys [
↑
] or [
↓
] to change the number
to "2" (Analog output (2) gain adjustment).
･
The display of the setting value automatically returns to that
of the setting item in ten seconds. Unless a setting value is
specified while it is displayed, it cannot be changed.
32. Press the [SET] key.
･
The display of the setting value automatically returns to that
of the setting item in ten seconds. Unless the [SET] key is
pressed while a setting value is displayed, it is not confirmed.
･
When "S-06" is displayed again, the settings of the analog
output (2) gain: L-03 and analog output (2) offset: L-04 are
automatically changed.
33. Press the [MONI/FNC] key.
･
The [FNC] LED turns off, after a monitor item is displayed for about one second, its data appears.
34. Turn off the converter, and open the front cover.
35. Remove the short-circuit wire between the terminals [AOT2] and [AIN2] on <IO66-Z>.
36. Remove the short-circuit wire between the terminals [G] and [G-OT] on <IO66-Z>.
37. Close the front cover.
