tousek TPS 20 Скачать руководство пользователя

Страница: 16 / 48

- 16 -

tousek

/ E_TPS-20_03 / 30. 08. 2016

The different menu points are indicated as follows:



= selectable settings



= factory settings



= status display

shows the menu points which are in the “ BASIC SETTINGS”

Display

–

ESC

ENTER

•

The program menu is divided into “BASIC SETTINGS” and “MENU CONTROL”

BASIC SETTINGS

•

When entering the programming of the control unit for the first time you will see the BASIC SETTINGS

(see page 31)

• Here the necessary adjustments which are necessary for the use of the operator/gate can be set quickly.
• For advanced settings/programming please choose the menu point “menu (control)”.

MENU CONTROL

• For futher programming you will reach immediatly the MENU (CONTROL)

(Basis settings are skipped)

• The menu control includes all kinds of settings.

Programming menu

Adjustments - overview

3.4 Adjustments - overview

Sliding gate operator TPS 20, -20N, -20PRO

Programming buttons

Adjustments - overview

•

The adjustment (programming) of the operating parameters is carried out with four programming buttons and
the display.

•

Before starting the programming, please choose the language. Use the buttons

to choose menu langua-

ge and confirm with

ENTER.

• Note: Language selection can also be chosen by pressing the ESC button for 5s, from any position in

menu

• The text display informs about behaviour, chosen menus

and adjustment of different settings.

• The programming of the control is carried out with the help

of four buttons

(+, -, ENTER und ESC).

• Scrolling through the available menu points (up/

down) or the adjustment of a parameter (value in-
crease/decrease) is carried out with buttons

and

–

AUTO-COUNT:

when holding one of the buttons the value

changes automatically.

• When pressing the

ENTER

-button a confirmation for

entering the shown menu point, resp. for accepting the
shown value of a parameter is given.

• When pressing the

ESC

-button you return to the superior

menu point. Possibly changed adjustments of a parameter
are rejected with this button (the former values will remain).

•

AUTO-EXIT:

if no button is pressed during 1 min. then the

menu switches automatically to the “ready” menu (wihtout

saving changed parameters)

Содержание TPS 20

















































Результаты поиска

Содержание TPS 20

Отзывы:

Похожие инструкции для TPS 20

Бренды по названию

Популярные бренды

tousek TPS 20, Руководство по монтажу и установке

Результаты поиска

Содержание TPS 20

Отзывы:

Похожие инструкции для TPS 20

Бренды по названию

Популярные бренды