Toshiba Satellite 200 Series, Руководство пользователя

Страница: 281 / 382

If Something Goes Wrong
Fixing Device Related Problems
294
mode. This mode lets you see your work exactly as it will print.
Contact the software manufacturer for more information.
Modems
A modem, fax/modem or fax/voice/modem is a serial device. This
section lists common modem problems.
The modem won’t receive or transmit properly.
Make sure the RJ-11 cable (the one that goes from the modem to
the telephone line) is firmly connected to the modem’s RJ-11 jack
and the telephone line socket.
Check the serial port settings to make sure the hardware and soft-
ware are referring to the same COM port (in Device Manager
under Modems for PC Card modems under Ports for an external
modem).
Check the communications parameters (baud rate, parity, data
length and stop bits) specified in the communications program. It
should be set up to transmit at 300, 1200, 2400, 4800, 9600, 14400
or 28800 bps (bits per second). Refer to the program’s documenta-
tion and modem manual for information on how to change these
settings.
The modem is on, set up properly and still won’t transmit or
receive data.
Make sure the line has a dial tone. Connect a telephone handset to
the line to check this.
The other system you are trying to contact may be busy or
disconnected.
The PC Card modem used to work, but doesn’t anymore.
Check in Device Manager to see if the modem is listed.
If it is listed but has an X next to it, the modem is disabled. Dou-
ble-click the device and then check the Undocked and Docked (if
present) options before clicking OK.