Toshiba Satellite 200 Series, Руководство пользователя

Страница: 104 / 382

Learning the Basics
How and When to Turn the Computer Off
107
Install the Drives
To install the drive, follow these steps:
Do not insert the CD-ROM module into the external chassis.
The drive operates only when installed in the SelectBay.
1 Slide the drive into the SelectBay until you feel it click into
place.
2 Press down on the bay release until it is flush with the
bottom of the computer.
3 Slide the lock toward the front of the computer to lock the
drive into place.
How and When to Turn the Computer Off
It's a good idea to turn your computer off when you're not using it
for an extended length of time. There are, however, several things
to keep in mind when you want to turn off the power:
❖
Use either Windows 95 Shut Down or Suspend command to
turn the computer off. To automatically return to where you
left off after shutting down the computer, use the Windows 95
Suspend command instead of Shut Down. If you’re using bat-
tery power, this also saves power.
❖
Don't turn the power off if the disk-in-use light on the indicator
panel is on. Doing so may damage your hard disk or diskette
drive.
❖
If Resume Mode is turned off, shut down Windows 95 before
you turn the computer off.
❖
If you close the display panel while the computer is on, it beeps
loudly. To prevent this alarm from going off in the future, use
MaxTime or TSETUP to set the Panel Close Alarm option to
Disabled. See “MaxTime” on page 311 or “TSETUP” on
page 341 for more information.