4-10
Service Manual
5060-XXX
Removal Procedures
CAUTION: Remove the power cord from the printer or electrical outlet before you
connect or disconnect any cable or electronic board or assembly for personal safety and
to prevent damage to the printer. Disconnect any connections between the printer and
PCs/peripherals. The printer weighs 47.7 kg (105 lb) and requires at least two people to
lift it safely. Make sure your fingers are not under the printer when you lift or set the printer
down.
Note: Some removal procedures require removing cable ties. You must replace cable
ties during reassembly to avoid pinching wires, obstructing the paper path, or restricting
mechanical movement.
Outer EMC Shield
1.
Loosen screw type
“232” on page 4-5
(A) and lift the outer EMC shield from the
printer.
RIP Board
Go to
“RIP Board Assembly - Network, Model 5060-002” on page 7-25
or
“RIP Board
Assembly, Non-Network, Model 5060-001” on page 7-25
for part number.
1.
Remove the
“Outer EMC Shield” on page 4-10
.
2.
Remove the
“Rear Cover” on page 4-11
.
3.
Remove the USB connector screw type
“232” on page 4-5
(A).
4.
Remove the RIP board screw type
“232” on page 4-5
(B).
5.
Remove the parallel connector (C).
Содержание e-STUDIO 20CP
