![background image](http://html1.mh-extra.com/html/unitech/mp300/mp300_quick-start-manual_4016276001.webp)
Install Battery
1
Overview
Charge Battery
2
1. Unlock the battery door by sliding
the battery door tab down.
2. Open the battery door to a 90 degree angle
(Do Not Force Open).
3. Insert the battery as shown
(
Non-contac
t end first -
let the contact end drop into place).
4. Close the battery door
by sliding the battery door tab up.
Note:
Ensure that the battery side with two contact terminals are
facing down, making contact with the spring probes inside the battery
compartment.
Battery Door Tab
Li-Ion Battery
1. Plug the AC adapter output cable into
the AC adapter port.
2. Plug
the AC adapter output cable into
the appropriate AC line voltage socket.
3. The LED will illuminate indicating that the
battery is being charged.
4. After 180 minutes of fast charging the
LED will turn off.
ON/OFF Button
Paper Feed
Button
AC Adapter
Port
Platen
Roller
MSR Slot
Paper Door
Pull Lever
IrDA Window
Serial Port
MP
300
Mobile Printer
Quick Start Guide
Metal
Tear Bar
Paper
Compartment