Topcon GLS -2000 Series Скачать руководство пользователя

Страница: 86 / 94

15. WARNING AND ERROR MESSAGES

15.2 Warning

Type

Message

Description

Countermeasures

SD Card

Format failed.

An error occurred during

SD card formatting.

Check that the SD card is

inserted correctly. If the error

persists, format the card using a

PC with the SD format tool pro-

vided by the SD Association on

the web. (Download from: https:/

/www.sdcard.org/jp/downloads/

formatter_4/)

If the SD card cannot be format-

ted using this tool, the SD card

may be broken. Use another SD

card. If the second SD card can-

not be formatted, have the

instrument repaired.

SD card is not seated

Please re-seat

An SD card was not

recognized.

SD card lacks space!

Change SD card

The remaining capacity of an

SD card is lower than

required for the data to be

scanned.

Delete unnecessary data in the

SD card or insert an SD card

with sufficient capacity.

Data

selection

Failed to delete this file/

folder.

The file or the directory was

not deleted.

Check that the SD card is

inserted correctly. If the error

persists, format the card using a

PC with the SD format tool pro-

vided by the SD Association on

the web. (Download from: https:/

/www.sdcard.org/jp/downloads/

formatter_4/)

If the SD card cannot be format-

ted using this tool, the SD card

may be broken. Use another SD

card. If the second SD card can-

not be formatted, have the

instrument repaired.

This file can't open!

A file other than BMP or

JPEG is selected.

Select the BMP or JPEG file.

Tilt

Tilt Over

When the tilt sensor is set

to on, the instrument is tilted

6' or more.

At the [TILT 0 ADJUST]

setting, the screen will

display the tilt angle of

30''

or more.

Accurately level the instrument.

Paused by vibration!

When the tilt sensor is set

to on, if vibration is detected

during scan or photograph,

those operations are going

to pause.

And if tilt value is stable

again, those operations

restart automatically.

This message is also dis-

played when the instrument

is tilted significantly.

If the operation does not

resume, it may be because that

the vibration is still continuing or

the instrument is being tilted sig-

nificantly.

Set the tilt setting off and start

those operation.

Содержание GLS -2000 Series































































































Результаты поиска

Содержание GLS -2000 Series

Отзывы:

Похожие инструкции для GLS -2000 Series

Бренды по названию

Популярные бренды

Topcon GLS -2000 Series, Инструкция по эксплуатации

Результаты поиска

Содержание GLS -2000 Series

Отзывы:

Похожие инструкции для GLS -2000 Series

Бренды по названию

Популярные бренды