manualshive.com logo in svg

Topcon GLS -2000 Series, Инструкция по эксплуатации

Поделиться
Скачать
Topcon GLS -2000 Series Скачать руководство пользователя страница 11

7

3. LASER SAFETY INFORMATION

• Avoid setting the instrument at heights at which the path of the laser may strike pedestrians or drivers 

at head height. Operate the instrument with due caution to avoid injuries that may be caused by the 
visible laser beam unintentionally striking a person in the eye.

• Only those who have received training as per the following items shall use this product.

• Read this manual for usage procedures for this product.
• Hazardous protection procedures (read "LASER SAFETY INFORMATION")
• Requisite protective gear (read "LASER SAFETY INFORMATION")
• Accident reporting procedures (stipulate procedures beforehand for transporting the injured and 

contacting physicians in case there are laser-induced injuries). 

• Persons working within the range of the laser beam are advised to wear eye protection which 

corresponds to the laser wavelength of the instrument being used.

• Areas in which the laser is used should be posted with a standard laser warning sign.
• When using the laser-pointer function, be sure to turn OFF the output laser after distance measurement 

is completed. 

Содержание GLS -2000 Series































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды