Topcon GLS -2000 Series Скачать руководство пользователя | Manualshive

Страница: 5 / 94

background image

1

1. PRECAUTIONS FOR SAFE OPERATION

For the safe use of the product and prevention of injury to operators and other persons as well as
prevention of property damage, items which should be observed are indicated by an exclamation point
within a triangle used with WARNING and CAUTION statements in this instruction manual.
The definitions of the indications are listed below. Be sure you understand them before reading the
manual’s main text.

Definition of Indication

General



WARNING

Ignoring this indication and making an operation error could possibly result in death
or serious injury to the operator.



CAUTION

Ignoring this indication and making an operation error could possibly result in
personal injury or property damage.



This symbol indicates items for which caution (hazard warnings inclusive) is urged. Specific
details are printed in or near the symbol.



This symbol indicates items which are prohibited. Specific details are printed in or near the
symbol.



This symbol indicates items which must always be performed. Specific details are printed in
or near the symbol.



Warning



Do not use the unit in areas exposed to high amounts of dust or ash, in areas where there is
inadequate ventilation, or near combustible materials. An explosion could occur.



Do not perform disassembly or rebuilding. Fire, electric shock, burns, or hazardous radiation
exposure could result.



Because this instrument is heavy, make sure to carry it carefully using both the handle and
the side handle. There is a possibility that the instrument may topple and fall resulting in
possible injury, and incorrect lifting posture may also result in hurting your back.



When securing the instrument in the carrying case make sure that all catches, including the
side catches, are closed. Failure to do so could result in the instrument falling out while being
carried, causing injury.



When scanning the target with the flash light while the instrument is set to use the prism,
please pay attention to the surroundings before doing so. When the target scanning is started
with the flash light while the instrument is set to use the prism, a white spot beam will be
emitted from the scanner unit to detect the position of the prism. This spot beam may
decrease a driver or pedestrian's vision temporarily if it hits the eye and may cause a serious
accident.



Secure handle to main unit. Failure to properly secure the handle could result in the unit falling
off while being carried, causing injury.



Caution



Do not use the carrying case as a footstool. The case is slippery and unstable so a person
could slip and fall off it.



Do not place the instrument in a case with a damaged catch, belt or handle. The case or
instrument could be dropped and cause injury.



Do not touch the instrument while the motor is in operation. Injury could result.

«
...
3
4
5
6
7
...
»

Содержание GLS -2000 Series































































































Отзывы:

Нет отзывов

Похожие инструкции для GLS -2000 Series

Бренд: Radio Shack Страницы: 88

I810 - Scanner Firmware - PC

Бренд: Kodak Страницы: 17

Бренд: R&S Страницы: 17

PROFESSIONAL T8

Бренд: ICON Страницы: 28

Бренд: Raptor Страницы: 31

Бренд: MESSER Страницы: 17

Бренд: DAVID Страницы: 37

Бренд: Technology Solutions Страницы: 39

Бренд: Electronic.Star Страницы: 60

Бренд: Nikon Страницы: 57

Бренд: HandHeld Страницы: 11

Бренд: Zebex Страницы: 2

Бренд: JB Systems Light Страницы: 20

Бренд: Radio Shack Страницы: 40

Бренд: Datalogic Страницы: 44

ID ISC.ANT1700/740-SLA

Бренд: Feig Electronic Страницы: 66

Бренд: Unisys Страницы: 54

IRIS IRIScan Desk 5 Pro

Бренд: Canon Страницы: 46

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды