TMA
MANUAL – AP-POOL-X SERIES
30
TMA
|
B
iałostoczek 26,gm.Zabłudów,15-592 Białystok; Poland ; Tel. +48 857431246; VAT EU PL5420008413
19. WARRANTY
1.
UV sterilizers are exclusively for treatment of water/liquids which content is known.
2.
The manufacturer of the UV sterilizers - the TMA company guarantees efficient operation of the
equipment covered by this warranty card.
3.
In order to obtain warranty service during the warranty period it is essential to:
Possess a document confirming the purchase of the equipment (purchase invoice, receipt)
Perform installation and operation of the device in accordance with the instructions found in the
manual (included with the device).
4.
All defects of the product determined at any time during this Warranty shall be repaired at no additional
charge within 14 days from the date of delivery of the defective product to the manufacturer, based on
this filled Warranty. In exceptional situations, this period can be extended to 21 days.
5.
Defective equipment/product shall be delivered
COMPLETE
and appropriately packaged and secured
for transport. We reserve the right to refuse to recognize a claim for damage and components resulting
from poor security of goods in transport.
6.
During the warranty period, the supplier repairs or replaces parts of the equipment, in that order, as
appropriate, in accordance with the law, without any additional cost to the buyer. Products and parts
replaced during warranty become the property of the manufacturer.
7.
In the case of unfounded warranty claims, the claimant will be charged with any costs relating to the
services performed, e.g. transport.
8.
Installation and commissioning of the equipment can be made by the buyer following the instructions in
the manual that came with this product
9.
Manufacturer warrants that the product shall meet all specifications of performance as stated in the
Manual for the period of:
36 months from the date of purchase covering the stainless steel chamber
24 months from the date of purchase covering all electrical parts of the sterilizer
10.
The chamber is covered by Warranty for 36 months, as long as it is used for substance disinfection, in
accordance with the steel corrosion resistance list, according to EN 10088-1 norm.
11.
The use of the product not in accordance with the EN 10088-1 norm shall result in the loss of Warranty
for the chamber and cannot be grounds for any claims in case of chamber damage.
12.
The water flowing through the device cannot contain sulphur, solid substances that can be filtered or
iron over 0.3 mg/dm3.
13.
No warranty is given for the chambers made from AISI 304 stainless steel in the case of:
Chlorinated water with chlorine content greater than 0.3 mg/dm
3
, e.g. in swimming pools
The contents of chlorides greater than 200 mg/dm3
pH outside the range 6.5-9.5
application for brine water above 250 mg/dm3 NaCl
application to demineralized and distilled water
No warranty is given for the chambers made from AISI 316 stainless steel in the case of:
Chlorinated water with chlorine content greater than 1,0 mg/dm
3
The contents of chlorides greater than 450 mg/dm3
pH outside the range 6.5-9.5
Application for brine water above 800 mg/dm3 NaCl
14.
The purchaser shall have the right to have the product replaced if:
It is determined that there is a manufacturing defect which is irreparable; or
During the Warranty period there is a need of 4 repairs and even after these the exploitation of
the product according to the instructions is impossible.
15.
The term ‘repair’ does not cover all the actions stipulated in the Manual (i.e. routine maintenance) which
are to be performed by the user.
16.
The Warranty does not include:
Damage caused by inadequate storage of the products by the purchaser
Damage caused by faulty assembly or exploitation of the sterilizer
