TMA AP-POOL-X 1, Руководство пользователя

Страница: 8 / 32

TMA
MANUAL – AP-POOL-X SERIES
8
TMA | B
iałostoczek 26,gm.Zabłudów,15-592 Białystok; Poland ; Tel. +48 857431246; VAT EU PL5420008413
Standard features:

Sterilizer chamber made from stainless steel (AISI 316/316L),

Electrical enclosure, with control system,

Set of quartz sleeves

Set of UV lamps

Set of O-rings + backup set of O-rings

Terminals for connecting electromagnetic valve shutting off flow in case of power
or lamp failure
Optional Accessories:
-
UV intensity sensor
-
Sterilizer supports
4. TECHNICAL DESCRIPTION
Sterilizer’s chamber is totally made from stainless steel. Quartz sleeves with UV
lamps are mounted in the chamber.
When mounted vertically, the inlet should be located in the bottom part of the chamber
and the outlet in the upper part. When mounted horizontally, the arrangement is optional. At
the bottom of the chamber the drain plug is located, which is used to empty the chamber from
fluid. The power supply system is mounted in the electrical enclosure and connected with the
sterilizer by hi-potential wires. The enclosure houses, besides the power supply, is equipped
lamp working hours counter, the audible and optical alarm, and indicating lights with the
terminals for electromagnetic shutoff valve in case of lamp or power failure.
Power supply is 220-
230V ± 10%, 50-60 Hz (or 3 x 220-230V 50/60Hz).
The device has anti-shock protection by earth terminal.
Sight glass muff enables indication of working condition of the UV lamps.
4.1.
LEADING OUT THE ALARM SIGNAL IN AP-POOL-X1 MODEL
Connect alarm signal wires to the terminals 1 & 2 on electronic plate /neutral
– without
voltage/.
The contacts 1 and 2 operate with a preset delay of about 2-3 minutes - this is the time to
reach the full efficiency of the device. During this period, terminals 1 and 2 are open.
After 2-3 minutes, the device operates as follows:

CONTACTS 1-2 CLOSED
- sterilizer working properly

CONTACTS 1-2 OPEN
- UV lamp damage
- Alarm on
- Power cut off