TMA
MANUAL – AP-POOL-X SERIES
13
TMA
|
B
iałostoczek 26,gm.Zabłudów,15-592 Białystok; Poland ; Tel. +48 857431246; VAT EU PL5420008413
5.2. QUARTZ SLEEVES ASSEMBLY
(
GRAFICAL MOUNTING INSTRUCTION ON PAGE 27-29)
a)
Slide in gently through the nipple the quartz
sleeves; continue through sleeve guides onto
nests at the bottom.
b)
Place the O-ring over quartz sleeve and against
the lip of the nipple. Next place the washer over
the O-ring, screw the muff onto this assembly
with the provided tool. Turn the muff to
considerable resistance in order to tighten the
seal. Tightening the muff shall not break the
sleeve
.
c)
Fill the chamber under full pressure and check
the seal tightness.
!!! ATTENTION !!!
Tightening the muffs with other tools may cause
quartz sleeves breakage.
O-RING
STERILIZER CHAMBER
QUARTZ SLEEVE
WASHER
O-RING
STERILIZER CHAMBER
QUARTZ SLEEVE
MUFF
O-RING ON MUFF
O-RING AFTER FULLY TIGHTENED,
MUFF DEFORMS O-RING
/SUFFICIENT DEFORMATION/
O-RING BEFORE MUFF TIGHTENED
/SMALL DEFORMATION OF O-RING/
WASHER
O-RING
STERILIZER CHAMBER
QUARTZ SLEEVE
MUFF
O-RING ON MUFF
PROVIDET TOOL
Tightest seal around
quartz sleeve shall be
created
with
the
largest
possible
deformation of O-ring.
O-ring
is
visible
through the sleeve.
Tighten muff with the
provided tool, as seen.
STERILIZER CHAMBER
QUARTZ SLEEVE
WARNING!!
QUARTZ SLEEVE IS WERY
BRITTLE AND FRAGILE.
BE CAREFUL.
