TMA
MANUAL – AP-POOL-X SERIES
5
TMA
|
B
iałostoczek 26,gm.Zabłudów,15-592 Białystok; Poland ; Tel. +48 857431246; VAT EU PL5420008413
2. APPLICATIONS
Disinfection with UV radiation is a reliable, simple and inexpensive method of sterilization.
The use of this method is warranted every time microbiological risk exists.
Following applications might be listed, among many others:
-
Water in swimming pools
-
Control of green algae in ponds
-
Technological waters for cooling machines
-
And many others
The primary advantage of UV sterilization is water without microbes and damaging
chlorine so often used in sterilization of water.
Sterilizer uses special low pressure UV lamp to produce UV radiation of wavelength of
254 nm and 185nm, which causes photochemical reaction damaging DNA of microorganisms
leading to death or sterility.
The requirements for complete sterilization call for minimum dosage of 600J/m2 for
swimming pools. Water flowing from the sterilizer is ready for immediate use.
BK/W/0662/01/2019
THERE IS NO POSSIBILITY OF OVERDOSING UV RADIATION
DURING WATER STERILIZATION IN THE CHAMBER
THERE IS NO REQUIRED MINIMUM FLOW OF WATER/LIQUIDS THROUGH THE STERILIZER CHAMBER
Turning off radiators occurs at a temperature of approx. 85°C. Resuming at approx. 65°C
MINIMAL FLOW OF WATER IS NOT REQUIRED.
INCREASED FLOW THROUGH THE STERILIZER LOWERS THE DOSAGE DELIVERED TO
MICROORGANISMS AND LOWERS EFFICIENCY OF DISINFECTION
