Tiernan TDR7, Руководство пользователя

Страница: 130 / 226

Chapter 5 118
Configuring the TDR7
Setting the Clock
Whenever the
TDR7 is turned on or reset, the clock reverts to Day 0,
and the time reverts to 00:00:00. To set the day and the time a current
setting, follow the steps below.
In the steps listed below, whenever you press the
Enter
button, an
asterisk (
*
) displays and flashes for a few seconds in the upper right
corner of the LCD. When the asterisk disappears, the TDR7 has set the
parameter.
Setting the Day
The day must be set as a number between 1 and 31.
1. If the LCD is not displaying the System menu, press the
Previous
button until the
System
menu displays.
2. Press the
More
button until the LCD displays the Control
main menu, then press the
Select
button located directly under
the
Control menu. The LCD displays the
Init , RS232 , and
Clock submenus.
3. Press the
Select
button located directly under the Clock
submenu. The LCD displays the Day parameter.
4. To set the day, press the
Inc
(up) or
Dec
(down) button or use
the keypad to type in the correct day, then press the
Enter
button. Set the day to a number between 1 and 31.