Thermo Scientific TVA2020, Инструкция по эксплуатации

Страница: 175 / 190

Text Data Formats
Calibration
Thermo Fisher Scientific TVA2020 Instruction Manual B-11
Successful download of the calibration file resets the background
concentration to zero.
The calibration is stored as CAL.TXT in the following format:
Format
Comments
CALIBRATION DATA<CR><LF> Title, not processed
VER=xx.xx xx.xx=ver, right just, lead spaces
<CR><LF> Blank line, not processed
<CR><LF> Blank line, not processed
<detector calibration> PID if available, see below
<detector calibration> FID if available, see below
END<CR><LF> Marks end-of-text
The detector calibration format is as follows (note: from 1 to 9 span gas
points are allowed):
ddd CALIBRATION:<CR><LF>
<CR><LF>
CALIB KNOWN CALIB MEASURED<CR><LF>
TYPE CONC DATE/TIME CALIB VALUE<CR><LF>
----- ---------- ------------------- -------------------------<CR><LF>
ZERO aaaaaa uuu dd mmm yy hh:mm:ss bbbbbbbb COUNTS fffffffff<CR><LF>
SPAN1 aaaaaa uuu dd mmm yy hh:mm:ss bbbbbbbb COUNTS fffffffff<CR><LF>
. . . . . . . . . . . . . .
. . . . . . . . . . . . . .
. . . . . . . . . . . . . .
SPANn aaaaaa uuu dd mmm yy hh:mm:ss bbbbbbbb COUNTS fffffffff<CR><LF>
<CR><LF>
<CR><LF>
where:
ddd = detector type
"FID"
"PID"
aaaaaa = gas concentration, floating point, right justified,
leading spaces
uuu = concentration units:
"PPM", parts-per-million
"% ", percent
dd = day of calibration, 01-31
mmm = month of calibration, Jan-Dec
yy = year of calibration, 00-99
hh = hour of calibration, 00-23
mm = minute of calibration, 00-59
ss = second of calibration, 00-59
bbbbbbbb = detector reading for calibration gas, integer,
right justified, leading spaces
fffffffff = count status:
"OK ", no errors
"DET_OFF ", detector reading invalid
Calibration