Thermo Scientific TVA2020, Инструкция по эксплуатации

Страница: 42 / 190

Display Menus
Main Menu Structure
3-2 TVA2020 Instruction Manual Thermo Fisher Scientific
Whenever you turn on the TVA2020, a power-up self test is performed
and warning screens are displayed if any errors are found. Please refer to
“
Warning Messages ” on page 6-6 . If errors are detected, use the EXIT key
to clear error message, then MAIN MENU is displayed. When you press
the corresponding number key, as described in
Table 3–1 , the desired
menu and the associated display or menu appear automatically.
Table 3–1. Main Menu Selection and Functions
Key Function
1 = RUN Use this selection to assign tags to specific surveys and to view/log
analysis of organic/inorganic compounds. If the optional Bluetooth
module is active, the instrument must be in RUN mode to send
commands and capture data. (See “
Bluetooth Communications ” in the
Options section of this manual.)
2 = SETUP This menu contains configuration procedures and menu structure for
performing calibrations, entering ID numbers, setting alarm levels,
selecting log modes, entering response multipliers and setting
time/date.
3 = INFO This is a view-only menu structure that displays various instrument
diagnostic information.
4 = MEMORY Use this menu to put instrument into USB memory device mode to
download/upload information to/from a personal computer, to perform
a remote setup from a personal computer, to clear memory, or to
update firmware.