Thermo Scientific TVA2020, Инструкция по эксплуатации

Страница: 159 / 190

Optional Accessories
Bluetooth Communications
Thermo Fisher Scientific TVA2020 Instruction Manual 8-13
An optional Bluetooth module may be installed inside the sidepack to
provide a wireless data interface via Bluetooth. Bluetooth is used for Digital
Data Logging, to turn the pump on or off, or to reignite the FID.
The TVA 2020 will advertise the Bluetooth friendly name TVA2020<last
six hex digits of Bluetooth address>. A PC or PDA can then connect to it
using a passkey of 0000.
After connecting to the Bluetooth module from a computer or PDA, the
Serial Port Profile (SPP) is used to issue the following commands according
to
Table 8–3 .
Table 8–3. Bluetooth Commands
Command Result
log start Start Digital Data Logging
log stop Stop Digital Data Logging
detector pid Log PID data only
detector fid Log FID data only
detector pid_fid Log PID and FID data
ignite Reignite FID
pump on Turn pump on
pump off Turn pump off
screen Enter screen mode. In screen mode the sidepack
screen is shown, and is updated when the sidepack
screen is changed, or every two seconds.
push co (control)
push do (down)
push en (enter)
push ex (exit)
push le (left)
push ri (right)
push up
push 1
push 2
push 3
push 4
push 5
push 6
push 7
Send key to sidepack (screen mode only)
Bluetooth
Communications
Bluetooth
Commands