manualshive.com logo in svg

Teradyne Z1800 Series, Руководство оператора

Поделиться
Скачать
Teradyne Z1800 Series Скачать руководство пользователя страница 46

1-35

Z1800-Series Operator’s Guide

•

Keep fingers away from fixture receiver pins.

•

Remove rings, watches, and bracelets.

2.  Operator control panel

Pressing the Cancel switch stops test execution and returns to the start of the program. 
See the “Emergency Off Procedures” section for further details.

3.  Test jack panel

•

The Power Control switch turns power to the tester on and off. When the Power Control 
switch is off, the unswitched outlets are still powered. See the “Emergency Off 
Procedures” section for more detailed information.

•

When the analog debug LED is on, and the High Voltage option is installed, high 
voltage may be present on the E, F, and G test points.

•

The wrist strap receptacle is provided for grounding the antistatic wrist strap. Connect 
the wrist strap to one of the receptacles on the tester and wear it at all times when you 
are working on the system, except when you are working on the AC power control or 
when you are otherwise instructed.

Содержание Z1800 Series























































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды