Teradyne Z1800 Series, Руководство оператора

Страница: 106 / 118

3-13
Z1800-Series Operator’s Guide
Legend A legend on the upper right hand corner of the screen describes keyboard usage
and is valid only during orient mode. During orient mode, you can manually override the
device orientation and type from the keyboard if the programmer has not correctly oriented
the device in the setup.
Keyboard options are described below.
Keys Functions
S/s = start Starts probing mode.
P/p = package Toggles between QUAD and DIP packages. Choose DIP if you have pins on
2 sides. Choose Quad if you have pins on 4 sides.
O/o = orient Rotates the current IC graphic one quarter turn counterclockwise each time
you press the key.
Device orientation corresponds to its physical placement on the board when
mounted on the tester, as you face the front of the tester.
+/- = pin1 + moves the pin graphic indicating pin #1 counterclockwise around the
device.
- moves the pin graphic indicating pin #1 clockwise around the device.
</> = top < and > affects only QUAD devices.
< decreases the number of pins on the top and the bottom of the device and
redistributes the pins to the sides.
> increases the number of pins on the top and bottom of the device, taking
the pins from the sides.
D/d = default Reverts the graphics to the package and orientation specified by the global
setup or worksheet description entry.
C:/TPD/TSTTRCR - ICT
Files Edit Run Pgen Setup Utiility Templates GFI Convert
Pin contact
Indicator
[ ]—[ ]
START CANCEL SOF HLD RPT CRT
Tracer——cancel to terminate
High: 5.2500 Measure: 4.9713 Low: 4.7500 V Node: 1
Tracer -
Pin Check Utility
Please orient
device -
U15 - 741s241s
PASS
S/s
P/p
O/o
+/-
</>
D/d =
=
=
=
=
=
start
package
orient
pin1
top
default
000
000
010 010
S/s
P/p
O/o
+/-
</>
D/d =
=
=
=
=
=
start
package
orient
pin1
top
default