Teradyne Z1800 Series, Руководство оператора

Страница: 100 / 118

3-7
Z1800-Series Operator’s Guide
Selecting Option Buttons By displaying messages in the CRT Output window, the test
program may direct you to select one or more options from the option buttons line at the
bottom of the screen.
To select an option, either point the mouse cursor at the desired option and click the mouse
button, or press the number key that is located above the alphabetic keys on the keyboard.
The option you select will be highlighted. Once you start the test, the Status Line replaces
the Option Buttons line.
Selecting Test Control Buttons The Test Control buttons are Stop on Fail (SOF), Hold
(HLD), Repeat (RPT), and CRT (which displays test step messages on the screen as the
program runs). These Test Control buttons give you control over test execution.
ICT or FST Indicator
Select Program Name
18xx Windows mode
Edit Run Setup Utility Templates GFI Convert Pgen Files
Option 1
START CANCEL SOF HLD RPT CRT
Option 2 Option 3 Option 4 Option 5 Option 6 Option 7
CRT
Press START to test a board
C:\TPD\DEMO.DCA-ICT
18xx Windows mode
Edit Run Setup Utility Templates GFI Convert Pgen Files
Option 1
START CANCEL SOF HLD RPT CRT
Option 2 Option 3 Option 4 Option 5 Option 6 Option 7
CRT
C:\TPD\DEMO.DCA-ICT
Mount the Self-test Fixture in the Fixture Receiver
Select option 7 to skip all power on (Linear & Digital) test.
Press<START> to Continue.