Telit Wireless Solutions LE910-SKG, Справочник команд AT

Страница: 128 / 273

LE910-SKG AT commands reference guide
80437ST10619A Rev.1 – 2014-09-16
Reproduction forbidden without Telit Communications S.p.A. written authorization - All Rights Reserved page 128 of 273
+CMGL - List Messages
(PDU Mode)
Parameter:
<stat>
0 - new message
1 - read message
2 - stored message not yet sent
3 - stored message already sent
4 - all messages.
Each message to be listed is represented in the format:
+CMGL: <index>,<stat>,<alpha>,<length><CR><LF><pdu>
where:
<index> - message position in the memory storage list.
<stat> - status of the message
<alpha> - string type alphanumeric representation of <da> or <oa> , corresponding
to an entry found in the phonebook; used character set is the one
selected with cCSCS.
<length> - length of the PDU in bytes
<pdu> - message in PDU format according to 3GPP TS 3.40/23.040
(Text Mode)
Parameter:
<stat>
"REC UNREAD" - new message
"REC READ" - read message
"STO UNSENT" - stored message not yet sent
"STO SENT" - stored message already sent
"ALL" - all messages.
Each message to be listed is represented in the format (the information written in
italics will be present depending on +CSDH last setting):
+CMGL: <index>,<stat>,<oa/da>,<alpha>,<scts> [,<tooa/toda>,
<length>] <CR><LF> <data>
where
<index> - message position in the storage
<stat> - message status
<oa/da> - originator/destination address, string type , represented in the currently
selected character set (see +CSCS)
<alpha> - string type alphanumeric representation of <da> or <oa> , corresponding
to an entry found in the phonebook; used character set is the one
selected with cCSCS.
<scts> - TP-Service Centre Time Stamp in Time String Format