Telit Wireless Solutions LE910-SKG, Справочник команд AT

Страница: 63 / 273

LE910-SKG AT commands reference guide
80437ST10619A Rev.1 – 2014-09-16
Reproduction forbidden without Telit Communications S.p.A. written authorization - All Rights Reserved page 63 of 273
+CNUM - Subscriber Number
where:
<alpha> - alphanumeric string associated to <number> ; used character set should
be the one selected with +CSCS .
<number> - string containing the phone number in the format <type>
<type> - type of number:
129 - national numbering scheme
145 - international numbering scheme (contains the character "+").
AT+CNUM=? Test command returns the OK result code
Example AT+CNUM
+CNUM: "PHONENUM1","2173848500",129
+CNUM: "FAXNUM","2173848501",129
+CNUM: "DATANUM","2173848502",129
Reference 3GPP TS 27.007
+COPN - Read Operator Names
AT+COPN
Execution command returns the list of operator names from the ME in the format:
+COPN: <numeric1>,<alpha1>[<CR><LF>
+COPN: <numeric2>,<alpha2>[…]]
where:
<numeric n > - string type, operator in numeric format (see +COPS )
<alpha n > - string type, operator in long alphanumeric format (see +COPS )
Note: each operator code
<numeric n > that has an alphanumeric equivalent
<alpha n > in the ME memory is returned
AT+COPN=? Test command returns the OK result code
Reference 3GPP TS 27.007
+CREG - Network Registration Report
AT+CREG=
[<mode>]
Set command enables/disables network registration reports depending on the
parameter
<mode> .
Parameter:
<mode>
0 - disable network registration unsolicited result code (factory default)
1 - enable network registration unsolicited result code
2 - enable network registration unsolicited result code with network Cell
identification data
If
<mode>=1 , network registration result code reports:
+CREG: <stat>