The Mobility Sound Bluetooth dongle BT-Dongle
allows you to use a compatible wireless headset or
other audio accessory with your two-way radio.
Version 1.0 October 2010
Bluetooth Dongle
Model No.: BTD-3M2
Made in Taiwan
FCC ID: XTS-BTD-1M3,CE,RoHS
BTD-3M2 Bluetooth Dongle
QUICK START
1. Connect the Mobility Sound Bluetooth dongle (BT-Dongle) to a compatible
two-way radio.
2. Pair the Bluetooth dongle with a compatible wireless audio accessory.
3. Test and use.
Connecting the Dongle to Radio
STEP ONE: Connecting to Two-Way Radio
To connect your Bluetooth dongle to a two-way radio, follow these steps:
* Always turn off your two-way radio before connecting the Bluetooth dongle.
* Plug the Bluetooth Dongle BT-Dongle into the speaker-microphone / audio
accessory jack of your two-way radio.
* On some models of two-way radio, you may need to tighten a retaining screw to
ensure that the Bluetooth dongle remains attached to the radio
* Turn on your two-way radio and verify that the radio transmits and receives with
the dongle attached.
* * The Talk button on the Bluetooth dongle will not function as a Push-to-Talk
button for your two-way radio until a wireless audio accessory is successfully
paired to the dongle.
3
Controls and Connection
On/Off Switch
PTT Switch
2
Pairing With an Audio Accessory
STEP TWO: Pairing with an Audio Accessory
* Turn off the Bluetooth dongle. Wait at least three seconds.
* Turn the Bluetooth dongle on while holding down the Talk button on the
Bluetooth dongle.
* Continue to hold the Talk button down for approximately three seconds.
Release the Talk button when the status LED begins to flash two times per second.
* The Bluetooth dongle is now in audio accessory pairing mode. Activate the
pairing mode on your compatible wireless audio accessory.
* Once the wireless audio accessory and Bluetooth dongle are paired with each
other, the status LED on the dongle will show a constant blue light for three
seconds.
* If the Bluetooth dongle does not detect a compatible wireless accessory within 60
seconds of being put into pairing mode, the dongle will exit the pairing mode and
resume normal operation.
* Once successfully paired, you will be able to operate your two-way radio using
your compatible wireless accessory.
4
BLUETOOTH DONGLE USER’S GUIDE
For Compatible Wireless Audio Accessories
Status LED
Used to place the Bluetooth dongle in
pairing mode. The LED flashes messages
that let the user know the current status of
the Bluetooth dongle. Once paired with an
audio accessory, this switch is used to
activate the Push-To-Talk function of the
two-way radio.
