LE910-SKG AT commands reference guide
80437ST10619A Rev.1 – 2014-09-16
Reproduction forbidden without Telit Communications S.p.A. written authorization - All Rights Reserved
page 119 of 273
+CSMP - Set Text Mode Parameters
bit[6]
: Single Shot SM;
[0] - the SC is not required to make up to one delivery attempt
[1] - the SC is required to make up to one delivery attempt
bit[5]bit[4]bit[3]
: reserved
[000]
bit[2]bit[1]bit[0]
: Validity Period Format
[000] - No Validity Period specified
[001] - Validity Period specified as for the relative format. The
following octet contains the VP value as described before; all
the other octets are 0’s.
[010] - Validity Period is relative in integer representation. The
following octet contains the VP value in the range 0 to 255,
representing 0 to 255 seconds; all the other octets are 0’s.
[011] - Validity Period is relative in semi-octet representation. The
following 3 octets contain the relative time in Hours, Minutes
and Seconds, giving the length of the validity period counted
from when the SMS-SUBMIT is received by the SC; all the
other octets are 0’s.
<pid>
- 3GPP TS 23.040 TP-Protocol-Identifier in integer format (default 0).
<dcs>
- depending on the command or result code: 3GPP TS 23.038 SMS Data
Coding Scheme (default 0), or Cell Broadcast Data Coding
Scheme
Note: the current settings are stored through
+CSAS
Note: we’re storing through
+CSAS
the
<vp>
value too, but only as integer type,
i.e. only in its
relative format
Note:
<vp>
,
<pid>
and
<dcs>
default values are loaded from first SIM
SMS
Parameters
profile, if present. If it is not present, then the default values are those
above indicated.
AT+CSMP?
Read command reports the current setting in the format:
+CSMP: < fo>,<vp>,<pid>,<dcs>
Note: if the Validity Period Format (
<fo>
’s
bit[4]bit[3]
) is [00] (i.e.
Not Present
),
<vp>
is represented just as a quoted empty string (
“”
).
AT+CSMP=?
Test command returns the
OK
result code.
Example
Set the parameters for an outgoing message with 24 hours of validity period and
default properties:
AT+CSMP=17,167,0,0
OK
Set the parameters for an outgoing message with validity period in enhanced
format: the
<vp>
string actually codes 24 hours of validity period.
AT+CSMP=9,“01A80000000000“
OK
Содержание LE910-SKG
Страница 1: ......