Telit Wireless Solutions LE910-SKG, Справочник команд AT

Страница: 94 / 273

LE910-SKG AT commands reference guide
80437ST10619A Rev.1 – 2014-09-16
Reproduction forbidden without Telit Communications S.p.A. written authorization - All Rights Reserved page 94 of 273
+CAMM - Accumulated Call Meter Maximum
Note: <acmmax> = 0 value disables the feature.
AT+CAMM? Read command reports the ACMmax value stored in SIM in the format:
+CAMM : <acmm>
where:
<acmm> - ACMmax value in home units, string type: three bytes of the ACMmax
value in hexadecimal format (e.g. “00001E” indicates decimal value 30)
AT+CAMM=? Test command returns the OK result code
Reference 3GPP TS 27.007
+CPUC - Price Per Unit And Currency Table
AT+CPUC=
<currency>,
<ppu>[,<pwd>]
Set command sets the values of Advice of Charge related Price per Unit and
Currency Table stored in SIM (PUCT). The PUCT information can be used to
convert the home units (as used in commands
+CAOC , +CACM and +CAMM )
into currency units.
Parameters:
<currency> - string type; three-character currency code (e.g. “LIT”, “L. “,
“USD”, “DEM” etc..); used character set should be the one selected with
command
+CSCS .
<ppu> - price per unit, string type (dot is used as decimal separator) e.g.
“1989.27”
<pwd> - SIM PIN2; if PIN2 has been already input once after startup, it is required
no more
AT+CPUC? Read command reports the current values of <currency> and <ppu> parameters
in the format:
+CPUC : <currency> , <ppu>
AT+CPUC=? Test command returns the OK result code
Reference 3GPP TS 27.007
+CLAC - Available AT Commands
AT+CLAC
Execution command causes the ME to return the AT commands that are available
for the user, in the following format:
<AT cmd1>[<CR><LF><AT cmd2>[…]]
where:
<AT cmd n > - defines the AT command including the prefix AT
AT+CLAC=?
Test command returns the OK result code
Reference 3GPP TS 27.007