Telit Wireless Solutions LE910-SKG, Справочник команд AT

Страница: 166 / 273

LE910-SKG AT commands reference guide
80437ST10619A Rev.1 – 2014-09-16
Reproduction forbidden without Telit Communications S.p.A. written authorization - All Rights Reserved page 166 of 273
#GAUTH - PPP-GPRS Connection Authentication Type
2 – CHAP authentication
Note : if the settings on the server side(the host application) of the PPP are not
compatible with the AT#GAUTH setting, then the PDP Context Activation will
use no authentication.
AT#GAUTH?
Read command reports the current PPP-EPS connection authentication type, in the
format:
#GAUTH: <type>
AT#GAUTH=? Test command returns the range of supported values for parameter <type> .
#SNUM – Subscriber Number
AT#SNUM=<index>,
<number>[,<alpha>]
Set command writes the MSISDN information related to the subscriber (own
number) in the EFmsisdn SIM file.
Parameter:
<index> - record number
The number of record in the EFmsisdn depends on the SIM. If only < index > value
is given, then delete the EFmsisdn record in location < index > is deleted.
<number> - string containing the phone number
<alpha> - alphanumeric string associated to < number >. Default value is empty
string(“”), otherwise the used character set should bo the one selected with + CSCS .
The string could be written between quotes, the number of characters depends on
the SIM. If empty string is given(“”), the corresponding <
alpha > will be an empty
string.
AT# SNUM =? Test command returns OK result code.
#SIMDET - SIM Detection Mode
AT#SIMDET=
<mode>
Set command specifies the SIM Detection mode
Parameter:
<mode> - SIM Detection mode
0 - ignore SIMIN pin and simulate the status ‘SIM Not Inserted’
1 - ignore SIMIN pin and simulate the status ‘SIM Inserted’
2 - automatic SIM detection through SIMIN Pin (default)
AT#SIMDET? Read command returns the currently selected Sim Detection Mode in the format:
#SIMDET: <mode>,<simin>