LE910-SKG AT commands reference guide
80437ST10619A Rev.1 – 2014-09-16
Reproduction forbidden without Telit Communications S.p.A. written authorization - All Rights Reserved
page 130 of 273
+CMGL - List Messages
079128019291903011640A8110567892820000A70CF4F29C0E6A97E7F3F0B90
C
+CMGL: 1,2,,21
079128019291903011640A8110516529700000A709027A794E77B95C2E
+CMGL: 26,2,,17
08812801009901025911640A8110567892820014A704C7D1B1DB
OK
Reference
3GPP TS 27.005
+CMGR - Read Message
AT+CMGR=
<index>
Execution command reports the message with location value
<index>
from
<memr>
message storage (
<memr>
is the message storage for read and delete SMs
as last settings of cCPMS).
Parameter:
<index>
- message index.
The output depends on the last settings of command
+CMGF
(message format to
be used)
(PDU Mode)
The output has the following format:
+CMGR: <stat>,<alpha>,<length><CR><LF><pdu>
where
<stat>
- status of the message
0 - new message
1 - read message
2 - stored message not yet sent
3 - stored message already sent
<alpha>
- string type alphanumeric representation of
<da>
or
<oa>
,
corresponding to an entry found in the phonebook; used character set is
the one selected with cCSCS.
<length>
- length of the PDU in bytes.
<pdu>
- message in PDU format according to 3GPP TS 3.40/23.040.
The status of the message and entire message data unit
<pdu>
is returned.
(Text Mode)
Output format for received messages
(the information written in
italics
will be
present depending on
+CSDH
last setting)
:
+CMGR
: <stat>,<oa>,<alpha>,<scts>[,<tooa>,<fo>,<pid>,
<dcs>,<sca>,<tosca>,<length>]<CR><LF><data>
Содержание LE910-SKG
Страница 1: ......